Skip to content

Embryo Grading Explained: How to Read Your Embryo Report

MOM IVF Editorial TeamPublished 13 November 20267 min read
Embryologist in purple gloves using a microscope with a magnified blastocyst embryo shown on a monitor in an IVF laboratory

Medically reviewed by Dr. Poornima Durga, MBBS, DNB OBG, Reg. No. 56152/TG, MOM IVF Fertility & Research Center

An article in Express Healthcare on 4 November 2026 described a couple who went through IVF in India without ever being shown an embryo report, and argued that clearer, standard reporting should be the next priority for the country's fertility sector. That gap matters, because embryo grading is one of the few windows couples have into what happens in the laboratory. This guide explains, in plain words, what the grades on an embryo report mean, how they are worked out, and what they can and cannot tell you.

The short answer

Embryo grading is a visual score given by an embryologist under the microscope. Day 2 and day 3 embryos are graded on the number of cells, how even they are and how much fragmentation there is. Day 5 and day 6 blastocysts are usually graded with a number for expansion and two letters for the inner cell mass and the outer layer, for example 4AA. Grades help the team choose which embryo to transfer first, but they do not test chromosomes and they cannot promise or rule out a pregnancy.

What is embryo grading in IVF?

After egg collection, eggs are fertilised with sperm by IVF or ICSI and the embryos grow in an incubator for up to six or seven days. At set times the embryologist looks at each embryo and records how it is developing. That record, with a grade for each embryo, is what appears on your embryo report.

Grading is based on appearance (morphology) and timing. In 2025 the European Society of Human Reproduction and Embryology (ESHRE) and Alpha Scientists in Reproductive Medicine published a revised international consensus, known as the Istanbul consensus update, in the journal Human Reproduction. It gives laboratories a common language for these assessments, and much of what follows is based on it.

Illustration of three embryo stages: a day 1 zygote with two pronuclei, a day 3 eight-cell embryo and a day 5 blastocyst with inner cell mass
From left: a fertilised egg with two pronuclei, an eight-cell embryo and a blastocyst. (Illustration)

Day 1: checking fertilisation

About 16 to 17 hours after insemination, the embryologist checks whether each egg has fertilised normally. A normally fertilised egg, called a zygote, shows two pronuclei (2PN): one from the egg and one from the sperm. The consensus advises that 2PN zygotes are preferred for further culture and transfer. Eggs with one or three pronuclei are recorded separately, and your doctor will explain what that means for those embryos.

Day 2 and day 3: cleavage-stage grading

On days 2 and 3 the embryo divides into smaller cells. The consensus gives expected timings: for ICSI embryos, the median time to reach 4 cells is about 38 hours and 8 cells about 57 hours after insemination, roughly an hour later for conventional IVF. On a cleavage-stage report you will usually see three things:

What a day 2 or day 3 embryo grade looks at
Feature What it means What is preferred
Cell number How many cells the embryo has at the time of checking About 4 cells on day 2 and about 8 cells on day 3
Fragmentation Small pieces of cell material that have broken away Less fragmentation; the consensus prioritises embryos with under 10%
Symmetry Whether the cells are a similar size Even, similar-sized cells for the stage
Multinucleation More than one nucleus seen in a cell Noted on the report; discussed by the embryologist

Laboratories often turn these features into a simple grade such as 1, 2 and 3, or good, fair and poor. The exact labels vary between clinics, so always ask what the scale on your own report means.

Day 5 and day 6: blastocyst grading

By day 5 or 6, a developing embryo becomes a blastocyst: a ball of cells with a fluid-filled cavity. It has two parts. The inner cell mass (ICM) is the cluster of cells that may go on to form the baby. The trophectoderm (TE) is the outer layer that may go on to form the placenta. Most laboratories, and the 2025 consensus, use the Gardner system, which gives a number and two letters.

Blastocyst expansion grades (the number)
Grade Stage
1 Early blastocyst, the cavity is less than half the embryo
2 Blastocyst, the cavity is half or more of the embryo
3 Full blastocyst, the cavity fills the embryo
4 Expanded blastocyst, the embryo has grown and its shell (zona) is thinning
5 Hatching blastocyst, it has started to come out of its shell
6 Hatched blastocyst, it has fully left its shell
Inner cell mass and trophectoderm grades (the letters)
Letter Inner cell mass (first letter) Trophectoderm (second letter)
A Many cells, tightly packed Many cells forming a close, even layer
B Several cells, loosely grouped Fewer cells forming a looser layer
C Very few cells Very few, large cells

So a 4AA embryo is an expanded blastocyst with a tightly packed inner cell mass and an even outer layer. A 3BB embryo is a full blastocyst with a looser inner cell mass and a looser outer layer. The 2025 consensus also adds a further category for embryos that show very poor quality or signs of degeneration, which laboratories may record differently.

What embryo grades can and cannot tell you

Grades are useful for ranking. When there is more than one embryo, the team usually transfers the highest-ranked one first and freezes the others. But it is important to understand the limits:

  • Grades describe appearance, not genetics. An embryo can look excellent and still have a chromosome problem, and a lower-graded embryo can be chromosomally normal.
  • Lower grades are not a dead end. The consensus notes that embryos with a C grade, and blastocysts that reach that stage on day 7, can still be viable.
  • A grade is a snapshot. Embryos change from hour to hour, so a grade reflects the moment it was recorded.
  • Scales differ. Two clinics can describe the same embryo slightly differently, which is why standard reporting is being encouraged.

Time-lapse imaging and genetic testing

Some laboratories use time-lapse incubators that take frequent pictures of embryos without removing them from the incubator. The UK fertility regulator, the HFEA, currently rates time-lapse imaging as having no evidence that it improves the chance of a live birth for most patients, so it is optional rather than essential.

Grading also differs from preimplantation genetic testing for aneuploidy (PGT-A), which tests a few cells from the outer layer of a blastocyst for missing or extra chromosomes. PGT-A is not needed by everyone, and its pros and cons depend on age and history. Our advanced treatment page explains where it fits. You can also read the full sequence of steps in our IVF process guide.

What happens to embryos that are not transferred

Good-quality embryos that are not transferred in the fresh cycle can be frozen by vitrification and used later. Our page on embryo preservation explains how freezing and storage work, including your consent options.

Questions to ask about your embryo report

  • Can I have a written copy of my embryo report?
  • Which grading scale does your laboratory use, and what does each grade mean?
  • On which day was each embryo graded, and at what time?
  • Why was this embryo chosen for transfer first?
  • How many embryos were frozen, and what were their grades?
  • Would genetic testing or time-lapse imaging make a difference in my situation, and why?

A good embryology team will be happy to go through these answers with you. If you would like to understand your options before starting treatment, you can book a fertility treatment consultation.

Talk to us

If you would like your embryo report explained, or want to understand how embryos are assessed before you start IVF, our team can help.

To book a consultation, call +91 98986 83636 (Monday to Saturday, 11 AM to 3 PM) or use the appointment form.

MOM IVF Fertility & Research Center Pvt. Ltd., 12-2-710, 1st & 2nd Floors, Beside Premier Hospital, Nanal Nagar X Roads, Mehdipatnam, Hyderabad, Telangana 500028.

Sources

This article is general health information and is not a substitute for a consultation. Treatment decisions depend on individual tests and medical history. Research figures quoted here come from published studies and are not MOM IVF results.

Frequently Asked Questions

What does 4AA mean in embryo grading?
4AA describes a day 5 or 6 blastocyst. The 4 means it is expanded, the first A means the inner cell mass has many tightly packed cells, and the second A means the outer layer (trophectoderm) has many cells forming an even layer.
Is a day 3 or day 5 embryo better?
Neither is right for everyone. Growing embryos to day 5 gives more information for choosing between them, while day 3 transfer may be advised in some situations. Your doctor will explain which suits your case.
Can a low-grade embryo lead to a pregnancy?
Yes, it can. Grades rank embryos by appearance, and the 2025 international consensus notes that lower-graded embryos and day 7 blastocysts can still be viable.
What is fragmentation in an embryo?
Fragmentation means small pieces of cell material that have broken off from the cells of a day 2 or day 3 embryo. Less fragmentation is preferred, and the consensus prioritises embryos with under 10% fragmentation.
Is embryo grading the same as genetic testing?
No. Grading is a visual assessment under the microscope. PGT-A is a separate laboratory test of a few cells that checks for chromosome problems.

Keep Reading

Start Your Journey to Parenthood Today

Talk to Hyderabad's trusted fertility specialists. Compassionate guidance, transparent costs, and a treatment plan made just for you.